Automatic transmission Mercedes Vito 1 (W638)

Removal and installation of automatic transmission
Removal and installation of automatic transmission (vehicles with engines 111.948) Removing 1. Disconnect the negative cable from the battery. 2. Drain the fluid from...

Changing the transmission fluid and automatic transmission oil filter
1. Set the gear selector lever to position 2. Wipe the surface around the plug 6 and unscrew it from the sump 3 (see fig.6.54). Replace O-ring 8. Pic. 6.54. Changing the...

Automatic transmission tray
Automatic transmission pan (vehicles with engines 111,601.970,611.980) Removing 1. Drain the transmission fluid. 2. Remove cover 5 from the windshield washer reservoir...

Automatic transmission control unit
Automatic transmission control unit (vehicles with engines 111.601.970, 611.980) Removing 1. Disconnect the negative cable from the battery. 2. Remove the right...

Electro-hydraulic control unit
Electro-hydraulic control unit (vehicles with engines 111.601 and 611.980) Removing 1. Set the selector lever to position "R". 2. Disconnect the negative cable from the...

Electromagnetic gearshift valves
Removing 1. Remove the electro-hydraulic unit and disconnect the wiring from it. 2. Remove clips 2 and 4 (see fig.6.61a,b). Pic. 6.61a. Shift Solenoid Valves: 1. Bolt,...

Program switch of automatic transmission modes (cars with engines 111.601 and 611.980)
Removing 1. Disconnect the negative cable from the battery. 2. Remove the central panel 1 from the instrument panel (see fig.6.62). Pic. 6.62, Program switch for...

Inductive GTR Turbine Speed Sensor
Inductive GTR Turbine Speed Sensor (vehicles with engines 111, 601 and 611.980) Removing 1. Remove the automatic transmission pan. 2. Remove bolt 1 (see fig.6.63). Pic....

Inductive speed sensor of the driven shaft, automatic transmission
Inductive speed sensor of the driven shaft, automatic transmission (vehicles with engines 111, 601 and 611.980) Removing 1. Remove the electro-hydraulic unit. Wiring...

GTR radial oil seal
Removing 1. Remove automatic transmission and GTR. 2. Wipe the surfaces around the gland 1 (see fig.6.67). Pic. 6.67. GTR radial oil seal: 1. Oil seal, 2. Punch. 3....

Epiploon of a flange of the left semiaxis
Epiploon of a flange of the left semiaxis (vehicles with engines 111, 601 and 611.980) Removing 1. Drain the transmission fluid from the automatic transmission. 2....

Right axle flange oil seal (vehicles with engine 104.900)
Removing 1. Wipe the area around the gland. 2. Remove gland 1 (see fig. 6.69). Pic. 6.69. Epiploon of a flange of the right semiaxis (on vehicles with engine 104.900):...

Rear cover of automatic transmission (on vehicles with engine 104.900)
Removing 1. Set the gear selector lever to the position «P». 2. Remove the left wheel. 3. Disconnect the wiring connector from the multifunction switch. 4. Disconnect...

Gear selector lever position sensor (vehicles with engines 111, 601.970 and 611.980)
Removing 1. Remove automatic transmission. 2. Remove selector lever 1 (see fig.6.70). Pic. 6.70. Gear selector lever position sensor (vehicles with engines 111, 601.970...

Oil cooler automatic transmission (vehicles with engine 104.900)
Removing 1. Remove fan 1 oil cooler (see fig.6.71). Pic. 6.71. Oil cooler automatic transmission (vehicles with engine 104.900): 1. Fan, 2, 3. Nuts, 4. Oil cooler...

Oil cooler fan automatic transmission (vehicles with engine 104.900)
Removing 1. Remove the grille and air intake. 2. Unscrew the bolts 7 fastening the clamps 1 pipes of the air conditioning system 2 (see fig.6.72). Pic. 6.72. Automatic...

Gear shift cable
Removing 1. Remove the air duct 8 heating the passenger compartment (see fig. 6.73). Pic. 6.73. Shift cable: 1. Gear selector lever, 2. Transmission lever, 3. Gear shift...