Removing
1. Drain the coolant.
2. Drain the engine oil.
3. Remove the engine subframe.
4. Remove the oil gauge guide tube 1 (see fig. 5.39).
Pic. 5.39. Pallet:
1. Compressed air supply pipe,
2, 6, 10, 12. Bolts,
3, 14. Collar,
4. Pipe of the cooling system,
5. Oil gauge guide tube,
7. Oil filler neck,
8. pallet,
9, 13. O-rings,
11. Pan gasket,
AT 10 O'CLOCK. Oil level sensor.
5. Unscrew the bolt securing the oil filler neck 7 to the pan 8 and remove it.
6. Unscrew the clamp bolt 3 and disconnect the cooling system pipe 4.
7. Disconnect the wiring connector from the B10 oil level sensor.
8. Unscrew the bolt securing the transmission to the pallet 8.
9. Turn off bolts 1 of fastening of the pallet 8.
10. Remove the pallet 8.
Installation
11. Installation is made in an order, the return to removal. Replace O-ring 9.