Pic. 2.97. Oil pressure check:
1. Tee,
2, 3. Tube,
4. Retaining ring,
5. Adapter,
6. Pressure gauge,
7. Thermometer.
2. Screw adapter 5 with retaining ring 4 into the cylinder block.
3. Connect pressure gauge 6. Connect tube 2 to adapter 5 and tee 1.
4. Check the oil level and correct it.
5. Insert thermometer 7 through the guide tube of the oil level gauge.
6. Warm up the engine to 90°C. Measure the oil pressure in the engine at various RPMs. Oil pressure at various speeds is shown in table 2.8.
Table 2.8. Oil pressure
7. Install the removal part.