Removing
1. Disconnect the negative cable from the battery.
2. Remove bolt 1 (see fig.3.56).
Pic. 3.56. Starter:
1, 7, 8, 13. Bolt,
2. automatic transmission,
3. Fuel lines,
4. Windshield washer reservoir,
5. Box with connectors,
6, 10. Wiring connectors,
9. Base plate,
11. Nut,
12. Starter,
13. Wiring.
3. Disconnect fuel lines 3.
4. Remove the windshield washer reservoir 4.
5. Remove the cover of the connector box 5. Disconnect the wiring connector 6 in the box.
6. Unscrew the bolts 7 fastening the base plate 9.
7. Unscrew the bolts 8 securing the base plate 9 to the automatic transmission 2.
8. Remove base plate 9.
9. Disconnect wiring connector 10.
10. Unscrew nut 11 and bolt 13.
11. Remove the starter 12.
Installation
12. Installation is made in an order, the return to removal. Make sure that the fuel lines and wire 14 are installed correctly. Install wire 14 so that it does not touch the radiator fan.