Removing
1. Disconnect the negative cable from the battery.
2. Place the steering wheel in the center position and block the steering shaft in this position.
3. Turn off a bolt 1 fastenings of the hinge 2 (see fig.8.3).
Pic. 8.3. Steering shaft:
1, 3. Bolt,
2. Steering shaft joint,
4. Nut.
4. Remove the steering wheel.
5. Remove the fuse box.
6. Disconnect the wiring connector A12.2 from the fuse box. On vehicles with a 601 engine: Disconnect the vacuum tube.
7. Disconnect a vacuum tube from the ignition lock.
8. Turn off a nut 4 and bolts 3 fastenings of a steering shaft. Replace nut 4 and bolts 3.
9. Remove the steering shaft and disconnect the steering shaft lock.
Installation
10. Establish the lock of blocking of a steering shaft. On vehicles with a 601 engine: connect the vacuum tube.
11. Lock the steering shaft lock in the desired position.
12. Install the steering shaft.
13. Screw the steering shaft to the frame.
14. Install the ignition switch and fuse box.
15. Attach the hinge of a steering shaft 2 to a shaft of the steering mechanism 1.
16. Connect the negative cable to the battery.