Front suspension and wheels of the car Mercedes Vito 1 (W638)

Removal and installation of a forward suspension bracket
Removing 1. Remove wheels. 2. Disconnect brake lines and brake pad wear indicator wiring from strut 1 (see fig.7.1). Pic. 7.1. Removal and installation of the front...

Stabilizer bar
Removing 1. Remove the wheel. 2. Remove the bottom motor guard. 3. Remove flanges 2 and rubber supports 3 securing the stabilizer to the bearing surface (see fig.7.2)....

Lower Suspension Arm
Vehicles with engines 111.948, 601.970 and 611.980 Removing 1. Remove the wheel. 2. Unscrew the bolt 4 securing the lower arm to the engine subframe (see fig.7.3). Pic....

Wheel hub
Removing 1. Unscrew the nut 6 fastening the wheel hub and remove it (see fig.7.5). Pic. 7.5. Wheel hub: 1. Steering knuckle, 2. Ball bearing, 3. Retaining ring, 4. Wheel...

Rounded fist
Vehicles with engine 104.900 Removing 1. Loosen the hub nut 14 (see fig.7.6). Pic. 7.6. Rounded fist: 1. Drive shaft, 2. Steering knuckle, 3. Eccentric bolt, 4, 16....

Half shaft — removal and installation
Removing 1. Loosen the nut 2 fastening the hub (see fig.7.7). Pic. 7.7. Half shaft: 1. Half shaft, 2. Nut, 3. Bolt, 4. ABS sensor rotor, 5. Gasket. 2. Remove the front...

Central drive shaft with bearing
Vehicles with engines 111.948 and 601.970 Removing 1. Disconnect the right axle shaft 9 from the central drive shaft (see fig.7.8). Pic. 7.8. Central drive shaft with...

Left gearbox flange
Removing 1. Disconnect axle shaft 2 from left flange 1 (see fig.7.11). Pic. 7.11. Left gearbox flange: 1. flange, 2. Half shaft, 3. Retaining ring. 2. Turn off a nut of...