Removing
Loosen nut 96.
Installation
![](https://www.mercedesman.ru/img/s-class/2892.jpg)
1. Install nut 96 on upper steering shaft 70g. Install the lower steering shaft onto the nut 96 and screw them together, continuing to rotate both parts until they lock into the spline.
![](https://www.mercedesman.ru/img/s-class/2893.jpg)
2. Turn the lower steering shaft 80a so that the hinge fork is installed down. Insert the adjusting tool 075 into the groove of the upper shaft and fit the yoke of the lower shaft 80a so that it is parallel «X» to adjusting tool 075.
3. Install the steering wheel on the steering shaft. Tighten nut 96.