Clutch design
5 - Driven disk; 6 - Pressure plate; 7 - Clutch release bearing; 8 - Clutch release lever; 9 - Bolt; 02 - Installation tool
Removing
1. Remove the gearbox (see chapter Gear box).
2. Remove the bolts (9).
3. Remove pressure plate (6) and driven disk (5).
4. Check pressure plate (6) and driven disk (5).
5. Check flywheel and pilot bearing for wear.
6. Remove the clutch release thrust bearing (7).
7. Remove the clutch release lever (8).
Installation
Installation is carried out in the reverse order of removal.