Replacement of the rubber working element of the brush
1 - Brush
2 - Spring clips
3 - Rubber working element
4 - Bracket-lock
Note. Alternatively, the rubber working elements of the brushes can be replaced on an individual basis - it would be wise to entrust this work to car service specialists.
Removing
Attention! Before proceeding with the replacement of brushes, remove the key from the ignition switch.
1. Move the lever (leash) wiper blade away from the glass surface and rotate the blade to a transverse position.
2. Depress the locking tab and release the brush lock from the hook at the end of the arm.
3. Alternatively, the rubber working elements of the brushes can be replaced individually.
Removing the brush from the wiper arm
1 - Locking tongue
2 - Move down
Installation
Insert the brush into the hook at the end of the lever until the locking tab clicks into place. Check that the brush is secure.