Coolant hoses

1. Check the condition of the cooling system hoses and if a defect is found, replace the hose as follows.

2. Drain the coolant from the cooling system.

3. Remove the hose clamps and slide the clamps over the hose. Pull the hose and remove it from the fitting.

4. If the hose is not removed from the fitting, then simultaneously with the removal, turn the hose to the sides. When removing the cooling system hoses from the radiator, be careful, because the fittings on the radiator are fragile.

5. Install the hose on the fitting and secure it with a clamp.

6. Pour coolant into the cooling system.

7. Check the cooling system for leaks.