Warning! Do not adjust the seats while the vehicle is in motion.
1 - Longitudinal movement of the seat.
2 - Seat tilt adjustment.
3 - Adjusting the height of the seat.
4 - Adjusting the angle of the backrest.
The longitudinal movement of the seat is made after lifting up the handle located under the front of the seat. After the longitudinal adjustment and releasing the handle, be sure to check that the seat is clearly locked in the new position.
The inclination of the seat back is adjusted by turning the handle located at the bottom of the seat back.
To adjust the height of the seat, move the lever 3 up and in this position of the lever move the seat forward or backward. Moving the seat forward will raise it, and moving it backward will lower it.
To adjust the angle of the seat, turn knob 2 forward or backward.
To set the head restraints in height, pull out the handle located at the bottom of the seatback 4 and, turning the handle to one side or the other, set the desired height of the head restraints, then press the handle.
The tilt of the head restraints is done manually.
Install the headrest at the level of the back of the head.