Car rear suspension Mercedes E-Class (W123)

Design and technical characteristics of the rear suspension
The rear suspension is independent, with coil springs, diagonal levers, telescopic shock absorbers and anti-roll bar. Suspension springs and upper support cups Depending...

Removal, check and installation of shock-absorbers
Note. When measuring the position of the body in height and adjusting the angles of the rear wheels, it is necessary to use a special tool manufactured by...

Removal and installation of the rear anti-roll bar
Note. For vehicles with a body position control system, these works are carried out only by a service station specialist. Section of the mount of the anti-roll bar...

Removal and installation of a spring of a back suspension bracket
1. Remove the rear shock absorber or suspension strut (on vehicles with body position control). 2. Install the spring compressor onto the suspension spring. To do this,...

Removal and installation of the rear suspension assembly
1. Raise the rear of the car and put it on stands (coasters). Place wedges under the front wheels. 2. Remove the exhaust pipe. 3. Depending on the configuration, unscrew...

Removal and installation of the diagonal arm of a back suspension bracket
1. Remove rear suspension assembly (see Removal and installation of the rear suspension assembly ). 2. Remove the wheel drive shaft. 3. Loosen the nuts and remove the...

Removal, installation and adjustment of the hub and rear wheel bearings
Section of the rear wheel hub 1 - wheel drive shaft bolt; 2 - washer; 3 - bushing; 4 - bearing; 5 - hub body; 6 - hub Mounting rod dimensions 1. Place wedges under the...

Replacing the front rear suspension mount
Front rear suspension mount Removing the front rear suspension mount 1. Place wedges under the front wheels, raise the rear of the vehicle and place it on a stand. 2....

Automatic Body Position Control System
Some vehicle models are equipped with an automatic body positioning system, which hydraulically adjusts the height of the rear suspension travel. The system has two...