Stoplight switch
1 - brake pedal mounting bracket; 2 - retraction spring; 3 - hex nut; 4 - stop lamp switch; 5 - brake pedal lever; 6 - contact button; 7 - hinge bolt; a - installation size
1. Disconnect the wires of the switch, the inner fastening nut and remove the switch from the bracket.
2. Installation is carried out in the reverse order of removal.
3. Adjust the position of the switch with the fastening nuts so that the brake lights light up after 5-15 mm of pedal lever travel. With the pedal fully released, there must be a gap between the pedal lever and the fixed part of the switch (A) in 6-8 mm.