Internal elements of the car body Mercedes E-Class (W123)

Removal and installation of seats
Driver's seat 1. Raise the seat to its highest position and move it as far forward as possible. 2. Disconnect the return spring. 3. Turn away a bolt and put forward a...

Removal and installation of the instrument panel
1. Remove the glove box. 2. Remove both upholstery panels from under the instrument panel. 3. Remove internal moldings of a windscreen. 4. Turn out screws and unhook...

Removal and installation of a ware box and its cover
1. Remove the lock latch (two screws) and take out the pins. 2. Remove the light bulb and undock the wiring connector. 3. Take a ware box from the panel of devices. 4....

Removal and installation of the center console
Disconnecting connectors and wiring from the center console Removal of facing of the lever of a gear change from the central console 1. Remove both front floor mats. 2....

Removal and installation of a back ware box (models with a body a sedan)
1. Remove a back of a back seat. 2. Remove the two screws securing the drawer, lift the front of the drawer and remove it from the shelf. 3. Lift the middle part of the...

Removal and installation of the electric motor of a heater
1. Remove the bottom shield of the instrument panel, undock the wiring connector from the heater motor. 2. Remove the screw, lift the contact plate and disconnect the...

Removal and installation of a heater
Heater valve in the engine compartment Connecting hose of the heater tap Cable drive heater control Mounting dimensions of the heater mounting bracket a = 165.0 mm b =...

Removal and installation of a heater radiator
1. Remove the heater. 2. Remove fastening brackets and turn out screws, then remove a heater casing. 3. Remove the rubber seals and the remaining fastening clamps. 4....

Maintenance of the air conditioning system
Air conditioning system diagram 1 - compressor; 2 - capacitor; 3 - dryer; 4 - control valve; 5 - evaporator; 6 - thermal switch; 7 - pressure switch; 9 - thermostat 1....