External elements of the car body Mercedes E-Class (W123)

Body and its equipment — general description
The body structure is welded, all-metal, with a safety passenger compartment, with front and rear sections that absorb impact energy. The body is available in sedan,...

Removal and installation of a cowl
Correct position of the hood 1. Open the hood fully and place pieces of cloth under both rear corners of the hood. 2. Disconnect the windshield washer tube from the tee,...

Removal and installation of a cable of a drive of the lock of a cowl
Connecting the drive cable to the hood lock 1. Remove the bottom guard of the instrument panel. 2. Turn away a bolt of fastening of the handle of the lock of a cowl to...

Removing and installing the trunk lid
Removing 1. Remove both license plate lamps. 2. Remove the lamp and luggage compartment light switch. 3. With the battery already disconnected, release the wiring...

Removal and installation of the trunk lid lock
1. Open the trunk lid, unscrew the nuts securing the lock and remove the washers together with the lock. 2. From the inside of the back panel, remove the plastic lining....

Outside rear view mirror
1. If the position of the outside rearview mirror is disturbed by shaking, remove the mirror assembly and tighten the clamping screw. 2. To replace the glass, remove it...

Removal and installation of the hatch of a jellied mouth of a fuel tank
1. Open the cap and remove the filler cap retainer. 2. Turn away bolts of fastening of the hatch of a jellied mouth. 3. Install in the reverse order of removal, ensuring...

Removal and installation of bumpers
Front bumper 1. Loosen the nuts securing the brackets and, after pushing the bumper forward, remove it. 2. Installation is made in an order, the return to removal. 3. On...

Removal, adjustment and installation of windshield washer jets
Removing 1. Open the engine hood. 2. Squeeze the inlet tube. 3. Squeeze out the jet and remove upwards. Installation 1. Press the jet from above until it stops. 2. Put...