Clutch and drive shafts Mercedes C-Class (W203)

Specification of clutch and drive shafts
Common parameters Lubrication of drive shafts Internal SHRUS, gr 100 External CV joint, gr 100 When replacing the protective cover, supplement the joint with grease if...

Clutch design and description
Flywheel, basket and clutch disc 1 - Flywheel. The surface adjacent to the friction linings must be free of oil and grease and free of burrs. Make sure that the...

Clutch — removal, inspection and installation
Removing 1. Remove manual transmission, refer to Section Removal and installation of the gearbox . 2. Loosen the Torx screws securing the clutch basket (arrows in the...

Bleeding air from the clutch actuator, changing the hydraulic fluid
6-speed manual transmission Air must be bled from the clutch hydraulic actuator if the clutch pedal does not return or returns with deceleration, the clutch does not...

Removal and installation of cardan shaft
Cardan shaft 1 - Front damper; 2 - Cardan shaft flange; 3 - Cardan shaft assembly; 4 - Rear centering sleeve; 5 - Front cardan shaft; 6 - Casing; 7 - Ball bearing; 8 -...

The design and description of the drive shafts of the wheels
Rear wheel drive shafts 1 - Drive shaft version 1; 2 - Retaining ring; 3 - Drive shaft version 2; 4 - Locking bar; 5 - Torx screw; 6 - Hub fastening nut; 7 - Internal...

Removal and installation of drive shafts of wheels
Note. If the outer CV joint located on the wheel side is damaged, the corresponding shaft must be completely replaced. Removing 1. Apply the parking brake. Attention!...

Disassembly of drive shafts and replacement of protective covers
The outer CV joint is not disassembled. In the presence of any damages a shaft replace entirely. Both covers are removed from the inside. For extended periods of use, it...