Front suspension
Type - Independent, with springs and telescopic shock absorbers. On most models, a stabilizer bar is installed.
Rear suspension
Type - Independent, with springs and telescopic shock absorbers. On most models, a stabilizer bar is installed.
Steering
Type - Power steering gear with drag link, intermediate arm and tie rod. A steering damper is installed on the tie rod
Front hub bearing
Axial clearance - 0.01 to 0.02 mm
Wheel alignment and steering angles
Front wheels:
Wheel camber:
- Release models before October 1988 - 0°0'
- Release models after October 1988 - -0°25'
Longitudinal inclination of the kingpin (wheels in a straight line):
- Models before October 1988 - 10°10'
- Release models after October 1988 - 10°25'
Convergence (general) — 0° 20'
Rear wheels:
- Camber — -1°30'
- Convergence (general) — 0°25'
Disks
- Type - Stamped steel or aluminum alloy (depends on the model)
- Size - 6Jx15, 6.5Jx15 or 7Jx15
Tires
Disc size:
- 6Jx15 — 185/65R15
- 6,5Jx15 — 195/65R15
- 7Jx15 — 205/60R15
Tire pressure - Refer to section "Weekly check"
Connection tightening torque, Nm
Front suspension
Roll Stabilizer:
- Support collar nuts - 20
- Support bracket bolts - 60
Bolt of a collar of a nut of a nave — 12
Lower arm:
- Nut of a bolt of a collar of a spherical joint - 125
- Axle bolt nut - 120
Shock Absorber:
Nuts of the upper support to the body - 20
Nut of the middle support to the steering knuckle:
- Release models up to December 1984 - 75
- Release models after January 1985 - 110
Lower control arm bolts to steering knuckle (x2) — 110
Base plate nut - 60
Rounded fist:
Tie Rod Bolts - 80
Rear suspension
Roll Stabilizer:
Support clamp bolts - 28
Connecting link:
- Top nut - 30
- Bottom bolt nut - 20
Control lever:
axle bolt nuts:
- Nuts M10 - 40
- Nuts M12 - 70
Lower rear arm ball joint nut - 35
Lower arm:
- Internal axle bolt - 70
- Outer axle bolt - 120
Shock Absorber:
- Upper support nut - 15
- Upper support locknut - 30
- Lower support nut - 60
Steering
Tie Rod Ball Joint Nut - 35
Coupling bolt for steering arm - 55
Axial bolt of the intermediate lever - 110
Power steering pump:
- Mounting bolts - 25
- Pulley bolts - 30
Rubber coupling clamp bolts - 25
Steering gear mounting bolts - 70 to 80
Steering column bolts and nuts - 20
Tie rod shock absorber bolt nuts - 40
Steering wheel bolt - 80
Tie rod:
- Ball joint nut - 35
- Inner joint pinch bolt - 20
- Collar bushing of the outer hinge - 50
wheels
Wheel bolts - 110