1. Turn the ignition key to position 1 or 2.
2. Press the switch.
- position 1 - normal heating mode;
- position 2 - accelerated heating. At the same time, both signal lamps on the switch are lit. Approximately five minutes later, it automatically switches to normal heating mode.
3. Press the switch at the top to turn off the heated seats if one warning light is on. If both lights are on, press the bottom of the switch to turn it off.
The seat heating switches off automatically after approximately 30 minutes of operation.
Attention! If many consumers are connected or the battery is not sufficiently charged, the seat heater may not turn on. In this case, the signal light or both on the switch will flash. As soon as the mains voltage is sufficient, the seat heating will turn on automatically.